Nissan Titan Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
112 Posts
Discussion Starter · #1 ·
Does anyone have any thoughts or has anyone heard a titan with straight pipes. I have an 07 and am looking for a real deep sound. I am not a fan of the glass pak sound that is all popping and pinging. I have heard you get this with flowmaster. I was just looking for something different. There are very few titns here and none with any mods I know of. I was thinking cut the muffler and run straight pipes out the sids or do a Y pipe and run one out the passanger side. Any thoughts guys would be helpfull.
 

· Registered
Joined
·
25 Posts
i dont have straight pipes but i have the cowboy tips (they pretty much come out between back tires and bumper) and i love it....its loud and has a deep sound but i have magnalow. i just saw a guy pass earlier with pipes strait out the back and couldnt really hear them
 

· Registered
Joined
·
1,080 Posts
I have straight pipes on my truck.. Its very loud! Its sounds good idling and up to about 3000 rpm. But after that its starts the popping racket very bad! So if you dont like that, i definately wouldnt get straights.. Im fixn to put a magnaflow 14' on mine... Hope this helps..
 

· Registered
Joined
·
67 Posts
i had 2 bassani mufflers on my 08 there duals till the muffler down low it sounded mean but up top it was kinda raspy...today i went and got a dual 2.5" in and a single 3" out flowmaster and it has that deep muscle car sound we all like
 

· Registered
Joined
·
555 Posts
A Flowmaster Super 40 will give you what you want. I had that with the stock pipes and it sounded deep. No ricer sound at all.
 

· Registered
Joined
·
41 Posts
Got a friend that cut the muffler off and ran a pipe out in front of the passenger back tire. Sound good at idle and mid-range rpm, but like stated earlier it pops and cracks at higher rpms. not recommended by me or him. cheap way to get more sound out of your exhaust. good luck
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top