[dmunafo]

I am driving a couple hours to a get this axle and I am going to swap axles in a parking lot. I'm trying to find out the differences in the two so I can get them both going in a timely manner. From what I found out so far the only problem I would have would be the brake lines and I should be able to just swap them between axles but the brackets are different. Any one done this (I'm sure a lot of people have)? Is there anything I am missing? Will my calipers bolt on to his axle?

 

[dmunafo]

They are both 4 wheel drive (so the drive shaft should bolt up and not be a problem).

You might want to check on that. courtesyparts.com lists 2004-2006 4wd drive shaft as different from 2007+ 4wd drive shaft.

 

[dmunafo]

Maybe I am reading it wrong but it looks to me like they are the same... It lists a part number of 37320 as the rear drive shaft on the top and bottom. The drawing numbers are different and only thing I can see that is different is that the newer drawing is lacking part numbers for parts that are on the drawing (shows parts with no numbers for them). Am I missing something terribly obvious??

 

[dmunafo]

I see.... Sorry I was taking the 37320 as the part number... I'm dumb. From a quick search it looks like the current part number for the drive shafts made for Titans from 08/2006 are the same all the way through 03/2010. There is a different shaft made for the 10/2004 - 08/2008. Four wheel models that is. I don't have my Titan here to verify the year (it's at Nissan) but it should be made in 05 seeing as how it is a 06. I guess I will have to learn the hard way and just try it... I can also get his drive shaft if they are different, and hopefully it will mate to the tranny... Thanks for all the advice.