Nissan Titan Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
Shortly after I first bought my 05 Titan BT, I bought a Titan load leveling hitch. The sway bar brackets for that hitch were designed to fit a 4 inch trailer rail. My trailer has a 6 inch rail, meaning that I can't attach the sway bar brackets from the hitch to the trailer.

Has anyone out there figured out how to use the Titan load leveling hitch? Or is it just a big hunk of expensive metal? I am going to have to either find some other brackets that will fit the sway bar arms and the 6 inch trailer rail, or have something fabricated.

Any sugestions?
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #3 ·
Helinut,

Welding them to the frame is not a bad idea. My other thought was to cut the tops off the brackets and weld plates to extend their length. That would allow me to fit them to different trailers.

Anyway, for now, I have been trailering close to 5 tons by placing the weight over the trailer axles. The tongue weight is about 600-700 lb and the Titan handles the total weight pretty well.

Thanks for the response.
 
1 - 2 of 2 Posts
Top