[goodkill365]

aaah gotcha, i wana have them make me some rock sliders next, i have had a few close calls and dont want to end up needing new doors lol

 

[Nick@DirtKing]

Laser cut and CNC bent tubes ready to be built into our Titan front prerunner bumpers.

 

[Izzysplace]

Someone is gonna be awful tired!!!! Think someone needs to HOP TO IT!! WELD WELD WELD!!!

 

[El Mamito USMC]

Hey are they full bolt on? Or do I need to cut something.

 

[Izzysplace]

Nick Mentioned earlier in the post you will need to cut the front cross member off, not sure that has changed. Hell I think these would make the front stronger without the front cross member. Hey Nick maybe you should post a pic of how easy it is to remove the cross member.

 

[goodkill365]

ya you have to cut the cross member but it only takes like 4 mns with a sawzaw, and the frame horns are stronger and give more protection

 

[goodkill365]

ok here is the what it looks like after you cut the cross member off, tit is really easy and worth it, if i would not have had this bumper i prob would have needed a new radiator or more after my last trip to the dunes.

 

[El Mamito USMC]

Thanks man, I actually need to cut it, the nut that would hold the bumper on the horn its loose and now I can tigth bolt that I have holding the ligth bar..I think ill need to get one, but I was going to go with Nordics bumper since he can put my ligth bar and make a over bar to protect it for this same price. Going to Vegas for it its the hard thing

 

[Izzysplace]

Give Nick a call El Mamito maybe he can work something out with you!

 

[El Mamito USMC]

ok here is the what it looks like after you cut the cross member off, tit is really easy and worth it, if i would not have had this bumper i prob would have needed a new radiator or more after my last trip to the dunes.

i would have to give the call to nick.. becuase i cant use my cross member.. that nut thats inside the frame , behind the crossmember its loose. and the ligth bar that i have rigth now has a loose mounting point.. and i hate it. it raddles...

so i guess ill call nick and asking about it since i need a ligth bar mounted in it and protect it but if not i would have taken nordics bumper..

 

[Nick@DirtKing]

i would have to give the call to nick.. becuase i cant use my cross member.. that nut thats inside the frame , behind the crossmember its loose. and the ligth bar that i have rigth now has a loose mounting point.. and i hate it. it raddles...

so i guess ill call nick and asking about it since i need a ligth bar mounted in it and protect it but if not i would have taken nordics bumper..

Give me a call. I can see what we can do to make our bumpers fit your needs.

 

[El Mamito USMC]

Give me a call. I can see what we can do to make our bumpers fit your needs.

I can't, jaja the mic on my cell don't work. So I can listen but people don't hear me..lol

Pm ur cell and we can't txt, ill send u a pic of an idea that I want on the bumper

 

[Nick@DirtKing]

Another shot of our standard front bolt on bumper

 

[Cameron450r]

how far does your main tube sit from your bumper at the grille?

 

[goodkill365]

mine is at 5" from the grill to the middle of the top tube. doesnt look like that much though.

 

[Nick@DirtKing]

how far does your main tube sit from your bumper at the grille?

Our bumpers sit about 4.5"-5" away from the grill.

 

[Cameron450r]

me and a buddy just built one for my T and im really wishing we would have kicked it out a few more inches. i fear a vertical skid plate ://

mine sits about an inch and a half away all the way around the front. looks clean but the skid? ahh

 

[Izzysplace]

think mine is only like 3 inches from the bumper at max, I will take a pic looking down when i get the chance. thing is my bumper is pretty low profile.

 

[BeauBigler]

Nick,

Can your make a bumper that could hold a winch?


Sent from AutoGuide.com App

 

[importslayer17]

So is there any way that I can get mine as a bolt on or do I have to modify it...I live in GA and they charge way to much to weld ****!