Nissan Titan Forum banner

Transmission help!!

4723 Views 12 Replies 6 Participants Last post by  LUBECAKES
So I decided to change the transmission fluid myself the other day, didn't think anything could go wrong right, to easy of a job? Well I drained the fluid from the pan, took the pan off and changed the filter, put the pan back on an filled the tranny back up with the correct amount of fluid. I did not touch any of the wires, I even redrained and checked everything to be sure, all wires still connected and fine. I used the Castrol that's suppose to be the equivalent to matic J, yes I know nissan calls it matic S now. So the problem is that it seems like it's not hitting the last gear and that it drives at a higher rpm than normally. Used to be able to go 70 to 75 and be at 2k rpm, now it's at almost 3k at that speed. Also got it throwing a code p0740 and p0745 which says, torque converter clutch solenoid circuit and p0745 says pressure control solenoid. So my question is, how the he'll can changing the oil and filter on the tranny without touching anything else cause this? What exactly needs to be fixed and what organ am i gonna need to donate to get this fixed? Oh and she's a 07 4x4 with 120k miles and 6 inch RC lift.
1 - 1 of 13 Posts
Hold up, I'm pretty sure there is no filter inside the transmission. Theres just a mesh screen that can be cleaned. So what did you replace?
  • Like
Reactions: 1
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.