Nissan Titan Forum banner

Upper control arms

1475 Views 3 Replies 3 Participants Last post by  FishnAlaska
High everyone,
I have a 3 in spacers in front and 2 in the back my upper control arms clearance isn't as good as it should be so it hits the coil/strut mount and I'm wondering it the rough country upper control arms will help my problem or do I need a full suspension lift to get it to sit normal again I also have stock size tires still I haven't put bigger tires on yet


Bart's Titan
1 - 1 of 4 Posts
You will still have contact with the RC's, I ran 2.5" and still had to trim the coil bucket lip down a touch, you would need to go with DK or PRG arms to clear with a 3" spacer.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.