Nissan Titan Forum banner

What do I need??

778 Views 6 Replies 6 Participants Last post by  thebassn8tr
Ok, I have a 2015 Titan pro 4x with a PRG 3.5" lift consisting of PRG UCA's, bilstein shocks front and rear, 5100's and 5125's I believe), and all the other components. I want to jump up to the 6" lift. What do I need and what is the most economical way to do this?
  • Like
Reactions: 1
1 - 1 of 7 Posts
Because of CV angles you should not go higher in the front than 3" on a 4x4 unless you do a bracket lift like others have mentioned. You can do rough country but to make it comparable to a Procomp lift kit you'll have to add $200 front torsion bars, $90 brake lines, and $90 endlinks because the rough country endlinks are a really poor design. In addition the rough country requires cutting your truck to install the lift kit. I'll have a Procomp stage 2 lift kit with literally 300 miles on it for sale next month. The stage 2 is the basic Procomp kit but comes with coilovers, brake lines, torsion bars, and upgraded heim cst style endlinks. Pm me if interested.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.