Nissan Titan Forum banner

What do I need??

778 Views 6 Replies 6 Participants Last post by  thebassn8tr
Ok, I have a 2015 Titan pro 4x with a PRG 3.5" lift consisting of PRG UCA's, bilstein shocks front and rear, 5100's and 5125's I believe), and all the other components. I want to jump up to the 6" lift. What do I need and what is the most economical way to do this?
  • Like
Reactions: 1
1 - 1 of 7 Posts
The 5100's are known to blow out when combined with a 6" bracket lift, the 5125's will be too short for the bigger rear spacer. The only thing you will reuse from your current setup will be the bump stops and the UCA's. pretty much everything else will be replaced with the parts from the bracket lift which will include the rear shocks, but not the fronts. Rough Country is the least expensive, about $1000 right now on sale. Next would be the Procomp which is about $1600.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top