Nissan Titan Forum banner

What values need to be logged for Uprev

674 Views 3 Replies 3 Participants Last post by  RB's Titan
Ok flashed and ready to go. But now what values need to be logged for uprev to fine tune their maps for my truck? I have seen these values posted before but my search has turned up nothing tonight.
1 - 4 of 4 Posts
Found them.
A/F CORR-B1 (%)
A/F CORR-B2 (%)
AFR WB-B1 (AFR)
AFR WB-B2 (AFR)
A/F WB-B1 (V)
A/F WB-B2 (V)
ACCEL PED POS 1 (V-Accel)
B-FUEL SCHDL (ms)
CAL/LD VALUE (%)
COOLANT TEMP (F)
ENGINE RPM (rpm)
IGN TIMING (BTDC)
INJ PULSE-B1 (ms)
INJ PULSE-B2 (ms)
INTAKE AIR TMP (F)
MAF GM/S (gm/s)
MAS A/F -B1 (V)
THROTTLE POS 1 (V-Throttle)
VEHICLE SPEED
TURBINE
3 0-60 logs after learning maps

just in case anyone else needs them
See less See more
PiercerNC said:
Found them.
A/F CORR-B1 (%)
A/F CORR-B2 (%)
AFR WB-B1 (AFR)
AFR WB-B2 (AFR)
A/F WB-B1 (V)
A/F WB-B2 (V)
ACCEL PED POS 1 (V-Accel)
B-FUEL SCHDL (ms)
CAL/LD VALUE (%)
COOLANT TEMP (F)
ENGINE RPM (rpm)
IGN TIMING (BTDC)
INJ PULSE-B1 (ms)
INJ PULSE-B2 (ms)
INTAKE AIR TMP (F)
MAF GM/S (gm/s)
MAS A/F -B1 (V)
THROTTLE POS 1 (V-Throttle)
VEHICLE SPEED
3 0-60 logs after learning maps

just in case anyone else needs them
Thanks for posting this again, I will be needing them! Hopefully before June!!!
Please ADD TURBINE. So you can monitor slip.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top