Nissan Titan Forum banner

What Would Cause This?

1069 Views 12 Replies 5 Participants Last post by  dubyam
I recently purchased a 2014 Titan that came with what appears to be a Rough Country 3" lift up front and a shackle rear lift. One thing I didn't notice right away but am noticing now is that the bed of the truck sits at an angle where the rear side appears to be tipped upwards. When I measure the gap between the bed and the cab, the bottom of the gap towards the ground is 1 3/8" and the top of the gap is 5/8". I've had multiple people look at this including the Nissan dealership and no one really knows what's going on. The frame doesn't appear to be bent, but I'm wondering what else would cause the bed to be slanted like that. It looks like the prior owner could have potentially backed into something that lifted the bed up, but again I have no idea how it would do that without bending the frame. Any thoughts?
1 - 3 of 13 Posts
Snap some pics of the underneath, where the mounts are. Could be somebody did a homebrew body lift and it's not straight. Or could be a bent frame. Have a body shop you trust check that.

While I'm commenting, I like your wheels. Care to share what brand/size they are? And what size tires are you running? Looks good.
Well crap. Anybody else have any idea of brand or model of that wheel?
Well, dadgum, on the wheels. I won't run spacers, so that's out.

Sorry to hear it's bent. Hope they don't give you too much grief about it and take care of you.
1 - 3 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.