Nissan Titan Forum banner

wheel grinding

689 views 1 reply 2 participants last post by  54warrior 
I had an issue with one of the clamps on my RF outer CV boot. I bought a large stainless screw type hose clamp and put it on there. Cut off the excess length and it's been fine since. Has been on there for a good 20k. I'd be sure to mount the clamps so the "leading edge" is facing opposite of rotation-if you don't understand what I'm saying, let me know, I'll try to explain it better.

Also note that the stock type clamps, oetiker clamps, require a special tool to install them (oetiker pliers).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top