Nissan Titan Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter · #1 ·
I've got my TrueTrac on order and wanted to know what I needed for installation. I know wheel bearings and axle seals, anything else? How long did it take and do you have any tips? Thanks.
 

·
Registered
Joined
·
31 Posts
I would recommend taking it to someone. If you have to ask what is needed then let someone else do it. You need some special tools and you have to be very accurate when you set of the Ring and Pinion. I have never done one for a Titan, but I have done a D-44 front axles and a couple of Ford 9" rear ends and they both require a good bit of experience.
 

·
Registered
Joined
·
103 Posts
I agree, it is not rocket science by any means but if you are not 100% and hose the setup up then the gear set will be toast in short order. $$$.
Winder said:
I would recommend taking it to someone. If you have to ask what is needed then let someone else do it. You need some special tools and you have to be very accurate when you set of the Ring and Pinion. I have never done one for a Titan, but I have done a D-44 front axles and a couple of Ford 9" rear ends and they both require a good bit of experience.
 
1 - 3 of 3 Posts
Top