Nissan Titan Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3,308 Posts
Discussion Starter · #1 ·
Hey,

Two people told me this set up won't work, but they never told me why, lol.

Can anyone elaborate on it?

CST 7" Lift
20x8.5" - OS = +14 MM - BS = 5.26"
Cooper Discoveries STT - 35x12.50x20

Thanks
 

·
Registered
Joined
·
146 Posts
I've got that lift but with 20x9 and -12offset 4.5 backspacing.

I'm running 12.5" wide tires and the distance from the spindle to the edge of the tire is about 1 1/4 inches. With a 5.26" BS I think your tire might rub on the spindle or come very close.

Also, you might come close to rubbing the frame on full turn. Not sure on that one!
 

·
Registered
Joined
·
1,464 Posts
Warp09 said:
Hey,

Two people told me this set up won't work, but they never told me why, lol.

Can anyone elaborate on it?

CST 7" Lift
20x8.5" - OS = +14 MM - BS = 5.26"
Cooper Discoveries STT - 35x12.50x20

Thanks
The coop stt are 13.5 I have them on my truck. I have 20x10 with -12mm bs5.03 and it rubs on on my fender liner and the pinch weld area. It also rubs on the front corner once in a blue moon unless it is rubbing the pinch weld area. It is hard to trouble should when your driving so I just ignore it because it doesnt happen to often.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top