[Motomules]

So I've got a weird issue I'm trying to narrow down guys. My rear windows can roll down from the master switch just fine, and they can roll down from their respective switches in the back just fine. The problem is trying to roll them up, I can only roll up the rear windows from the master switch at the driver seat. Trying to roll them up from the switches in the back yields a whole lotta nothin. No clicking, no noises whatsoever. Anyone got any ideas what it could be?

 

[mulletcutter]

might be switch. Either try the volt meter or get new switches

 

[TLawing]

It's the regulators for the door electric motors. Change the door windows regulars and motors. They come as one set per window.

 

[Jeremy Isaac]

So... I'm diving into my second window issue. My driver side window is not responding to the switch or to the fob/door lock. I'm guessing its the motor but I will see what I find this morning. I have already replaced the motor once so I'm hoping it isn't that. could the BCM cause this to happen as well?

 

[Tink Lawing]

The cable for the motor basically rubs the window when it's going up causing the window motors to draw more amps. Replace the motor/regulator assembly.

 

[Jeremy Isaac]

Yeah. I did a quick check of the wiring harness and didn't find any physical issues and power was getting to the motor... just waiting on my replacement motor from Autoparts Warehouse. Thanks.