Nissan Titan Forum banner

Windshield Washer Squirets not working

2633 Views 3 Replies 2 Participants Last post by  Walrus
I read the other thread and it did not help. My windshield washer "squiters" are not working. They both kind of just leak fluid out when I engage the windshield washer. I can hear the pump activating, and I see the fluid leaking out, but it does not spray. I have tried to clean them out with a needle, and that did nothing. Any other ideas? I was going to try to take them off all together and really clean them, but I have no idea how to even access them since they are behind a piece of plastic that runs the whole width of my truck... help!!!
Thanks :)
1 - 2 of 4 Posts
They're easy to pop off. Remove them and blow them out with high pressure compressed air.
They pop right off. You might need a knife blade or screwdriver. Pop them off, disconnect supply hose. Easier than you think.
  • Like
Reactions: 1
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.