If the dent can't be PDR'ed, then it won't be cheap. I'd say $400-$700 for a quality shop that will do the job right. There's a lot more work into fixing something like that properly than you might think.

 

I honestly think this dent will not be a problem to fix but 400 to 700 even for a small dent?

 

see if you can suction/pop it back out. It all depends on how deep and shap of the dent i guess.

 

Doesn't really matter so much how nasty the dent looks to you, the same steps are still required. They still have to strip the door down to bare metal, fill the dent, smooth the dent, prime, and paint- including a blend probably.

If the dent isn't terribly big and it hasn't creased the sheetmetal, then don't worry too much. A good paintless dent repair guy can probably solve your problem for $100 or less.

 

I did this once and put a 12" crease in the door of my wife's brand new 350Z,it was repaired by a paintless dent guy for about $75 and you would never know to look at it.The work these guys are now doing is amazing.
If your dent is not too close to the edge of the door,I'm sure they can fix it !

 

I had a softball size dent on my drivers side front bumper, courtesy of a lady who was blind and deaf as she backed up into me....
anywaz, it was about $350 to fix that. I guess it all depends on what ur deductible is, but it will easily be at least 300 bucks id say.

 

Click me

Here's something that may work for you.

 

Call a paintless dent guy. They will usually come by and give you a price for free. You would be amazed on what they can fix just prying on a dent using long rods from inside your door.

Depending on how bad the dent is maybe they guy could get it out in a couple of hours. Might only charge as little as $250 or so.

 

A buddy of mine had paintless dent removal come to his house and popped out a small dent for under $100

 

There are to many variables to be accurate. Call a paintless dent repair guy then if no good, next trip is to a body shop with free estimates. Good Luck.

 

Do it yourself paintless dent removal...click me

Another

 

Ya I think I going to call a dent guy to come buy, if this does not go well I will go to the repair shop. But I think calling the come to give me a quick estimate would be GREAT and if I get a deal under $100 I will be jumping up and down or :banasex0r ......you get the jiff but I will do that and keep you updated. Thanks again :cheers:

 

^^^^yep paintless dent removal is the way to go^^^

 

here is a quick try. Depending on how big or what type of dent.....

Grab some windex and a plunger. Spray windex, apply plunger like you would a toilet. If it pops it out, all you need to do is clean the poo off If it doesn't, try again. I have got out a few dents this way.

 

I am a 11 year dent guy ,post a picture and I will tell you how much it should run, or if it can or cannot be repaired

 

Do it yourself paintless dent removal...click me

Another

Ok I really want to try this but im still a little skeptical.

 

I am a 11 year dent guy ,post a picture and I will tell you how much it should run, or if it can or cannot be repaired

Alright then, im bout to take a picture and put it on here.....so be ready.

Oh, hahahaa I tried the plunger idea and no go, just a bunch of poo on the truck! :jester:

 

I had 2 small dents taken out by a paintless dent guy for $25 each. They drill a hole in the door frame and put a metal rod in then work it out. Pretty impressive i thought . They fill the hole in with a little rubber plug. I find myself looking for them whenever I look in another car.

 

ok camera will not provide a small enough picture size so, I cannot put it on here.

 

Do it yourself paintless dent removal...click me

Another

I've got a dent in one of my doors just like the one in the dry ice video. I've been wondering how to get rid of it without spending a lot of dough, too. I'll give this one a try and post my results.

 

dry ice will not work,but go ahead and try it,,how far below the door handle is the dent and how far from the edge of door,

 

dry ice will not work,but go ahead and try it,,how far below the door handle is the dent and how far from the edge of door,

Dent is actually almost dead center of rear passenger side door, but looks to be same size. about the diameter of a quarter.

 

should not be a problem for a good pdr guy,as long as it is not very sharp.
pricing wise i dont know where you live, in ny it would be around $100

 

ok camera will not provide a small enough picture size so, I cannot put it on here.

Use imageshack to host the picture…

http://imageshack.us/

Use the resize function, 1280 x 1024 will be good so we can get a good look at the dent.

 

ok camera will not provide a small enough picture size so, I cannot put it on here.

Open the picture in paint (all windows p/c have paint). Go to Image > Stretch/Skew. Under the stretch section, enter 25% for height and width. Save picture to your desktop - check file size.

Readjust stretch/skew as necessary...