I have a 07 2wd CC and have a 4" spindle and Bilstein 7100 coilovers. I went from 2 to 2.25" of preload and now the ride is rough. The truck sits too level and I want more front end lift so that I can take the preload back to 2". I want to know if I can run a bracket to lift the front end a couple of inches?
More lift?
NathanH
1 - 7 of 7 Posts
Joined
·
119 Posts
I have a 07 2wd CC and have a 4" spindle and Bilstein 7100 coilovers. I went from 2 to 2.25" of preload and now the ride is rough. The truck sits too level and I want more front end lift so that I can take the preload back to 2". I want to know if I can run a bracket to lift the front end a couple of inches?
Joined
·
6,181 Posts
If you get the PRG shackle you can drop the rear up to an inch.
Joined
·
3,868 Posts
run you a c/o spacer in the front with new uca's and get prg shackles. you will be set. a bracket lift will probably be too high. they are like another 4-6inches.
Joined
·
3,868 Posts
coil overs wont work on stock uca's from what i have been told and heard
Joined
·
119 Posts
They work great for me and I have no issues with clearance but just not enough lift.
Joined
·
2,683 Posts
i ran my coilovers with oem uca for awhile. you just have to make sure you get the right ones. some require new uca.
1 - 7 of 7 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
