Cornfed 2 1/2" front and 1 1/4" blocks in back installed!

LinkNuc · Jan 21, 2006

Wow, great fit, great kit, Cornfed 2 1/2" lift on the Front and 1 1/4" blocks in the back. Easy install, great ride, great feel, great look! J. Burtman and Cornfed come through again! In total,my back sits about 1/4" higher than the front which is perfect for hauling towing etc! Great kit great price...a definite buy for those interested! Thanks again Jason and Cornfed!

Jason can you post some of those pics taken today?

titanau · Jan 26, 2006

Looks like there are some more pictures added on that page.

http://www.burtmanindustries.com/zoomprod.php?id=ttncc_04_up_level

I've been emailing them back and forth for more info and it sounds really good and great price. Now, just need to get it shipped here to aussie land.

Jason B · Nov 5, 2014

Burtman Industries lift kits

Want to bump this up and let everyone know we are a sponsor now and these kits are avail for all years, and we can ever do custom sizes of anything you want.

papabearsc · Nov 6, 2014

Can you expand on what this means?

"The 2.5" spacers will include an aluminum spacer which mounts outside of the coilover and also a smaller UHMW spacer which requires a coil compressor to install inside of the coilpack. "

So there's a standard leveling spacer, then this extra one? What is it?

Jason B · Dec 3, 2014

The 2.5" lift uses two separate spacers to give the full lift without overextending the front suspension like other kits that mount the full lift outside of the coil pack.

papabearsc · Dec 11, 2014

I gathered that from the initial description.

I guess what I'm asking, is WHERE would a "spacer" go that wouldn't do this?

On top of the pack like the ProComp lift?

RDC · Dec 11, 2014

Do you have any better pictures of before and after with the 2 1/2 lift kit. The picture shown here looks like there are jacks holding the truck up?

Jason B · Dec 11, 2014

The jacks aren't holding the truck up, lol. Be sure to click "more pictures" on the site link. There are a bunch more.

Burtman Industries lift kits

krslund2 · Dec 11, 2014

How much was the kit?

Twistedframe · Dec 14, 2014

Does this require the addition of uca's on newer Titans?

titanle · Feb 11, 2015

can this kit be used with the bilstein 5100?

honda250xtitan · Feb 11, 2015

bilsteins lift the truck with preload, this kit also uses a spacer to do the same. Bilsteins have been known to bend and break at the bottom bolt location because of too much tension on the shock. I wouldn't recommend preloading the spring through a spacer and the bilstein preload. Just do a normal spacer that doesn't mount between the top hat and the coil spring.

Jason B · Mar 1, 2015

I've been selling this mild lift kit since 2006 and still have a few original owners with it on. Most with stock shocks and its never been an issue. This is a great mild lift that's affordable andirons great and guaranteed for life.

Cornfed 2 1/2" front and 1 1/4" blocks in back installed!

Top Contributors this Month

Recommended Communities