Just curious to see how rad this thing sounds, GLWS

 

Thanks!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Pm sent on bdgt. And how much for airaid cai?

 

BDGT Pending to mississippititan30!

 

I don't have hardly any miles on it, so I would probably do around $220 shipped on it. I won't be able to have it off until maybe next weekend - only reason I haven't listed a price yet.

Thanks!

 

Check this thread out.. http://www.titantalk.com/forums/titan-general-discussion/88391-unmarrying-bullydog-help.html

 

BDGT is sold, true duals still for sale!


Chris C.
2010 Titan SE
DME250 + SME300 In.The.Works.

 

God it's so tempting.....


Sent from my Autoguide iPhone app

 

Or leave it how it is and enjoy it because it sounds amazing as it is


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

That exhaust system is so sick. GLWS.

 

How is the drone in this setup?


Sent from my Autoguide iPhone app

 

Driving around town it's not noticeable at all. If you lug the engine at low RPM like going uphill in OD and not downshifting then you can notice the drone. Overall drone isn't bad, I'd imagine if someone wanted they could build two tailpipes with resonated tips fairly easily to reduce the drone.


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Do you have a video of it?


Sent from my Autoguide iPhone app

 

Yes but it's not great, I'm going to try to get a better one.

There are two in my Modular True Duals thread.


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Hey guys, for those of you who were following my Modular True Dual exhaust thread, here's your chance to buy the prototype! I am becoming way too busy to keep up with this, and could really use the money at this time...

This system is the best I have heard in person, I have put about 400 miles on it so far. The tone is strong and very powerful sounding, a nice low growl. There is no CIS to be heard, it is really, really "smooth" sounding but there is drone in the current configuration in the 1,500-1,900 RPM band. This would be easy as cake to install this, bring it to an exhaust shop and have them build two tailpipes and have resonated tips put on the end to reduce drone. If you have any questions about this system, PLEASE ASK - I know the in's and out's of the entire thing Asking $1,450 + shipping + Paypal fees (3%).
***I will provide flanges for the buyer at your cost if they choose you would like to have another modular section of your flavor welded up***

O....M....G.... its finally here! Lol don't think I got that kind of money right now, but I'll break the piggy bank and see what I'm working with. Lol

Sent from my Droid using AutoGuide.com App

 

Let me know!

Just to be clear guys, I am asking less than my cost on this system. There is a LOT of time and money invested in this.

At this point I will not be able to replicate this system due to a lack of funding and a large lack of time. If you want modular true duals here's your chance to get them!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

So in other words this is a one off system that you dont see yourself doing again? i think jteeter04 should buy this and put it on his project long bed titan whenever he finds one lol.

 

This is a one-off system but I still have all of my pro/e models and blueprints. If and when I find more time to work with this I would like to pursue making more units, but I'm closing on my first house March 1st and need the funds more than the exhaust.


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Man I would buy this if it was 2.25 pipe 2.5 is to big.

 

I thought 2.5" was the much preferred for you supercharged guys?

The difference in area from stock pipes to these true duals is 0.098in^2...unless your Titan is full track-trim and all that matters is the lowest E.T. you can get it doesn't really matter in my opinion.

Plus there are a lot more muffler/resonators available in 2.5" which the whole idea was to be able to swap components. It works great on my daily driven Titan and I love how it sounds, SOTP feels better too!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Bump!! Someone has to want this


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

***$150 Off TONIGHT Only!!!***

Asking price is cut to $1,300 from now till 11:59pm tonight!! This is everything you need from manifolds back, all bolt on - no welding required!!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Very cool setup, great idea and nicely put together. Bump for ya...someone needs to run this awesomeness. I'd love to, but I'd rather not sell a kidney to pay for shipping to Hawaii. If you guys didn't see the original build thread, you can check it out HERE. (Hope you don't mind me posting the link, Stilltime...thought it might help to see all the work you put into it)

 

Thanks a lot! It would probably be in the $150-$200 range


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Someone has to want an awesome exhaust!!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

How much for the cat? Jk..GLWS!

 

Evening bump, $1,275 takes it!!!


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Wow! That is a nice price considering the time and effort put into it. Stilltime, that is something to be proud of and if it doesn't sale hang it on the wall to look at!! bumpity bump........

 

Thanks! Yea it seemed like there was so much interest in the system and now I can't even sell the one-and-only system produced Not sure what it's going to take but I need someone to step up to the plate.

 

It's listed on eBay now guys... BIN is $50 higher than my asking price here, but the Reserve is a LOT lower, you'll just have to bid to find out where it's at!

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

 

You will get more exposure there also...Good luck!

 

Ha PM replied.


Chris C.
2010 Titan SE
MDE250 + MSE300 In.The.Works

 

Back your way