Nissan Titan Forum banner
Cancel
Create thread New Garage Forums

Pre Amp Signal From Factory RF System?

Jump to Latest
1 - 20 of 20 Posts
M

mattg

· Registered
Joined
·
4 Posts
Discussion starter · #1 · (Edited)
As i have been searching, i got extremely confused, and joined this fourm for a answer. I have a 2010 Titan with the factory RF 6 disk changer and the front door speakers started going out so i opt to replace with a set of JL Component spearkers.

Well the factory system is not providing enough output to power these things up to where they should be. So i plan on installing a amp to power these and eventually the whole truck(once i get the funds for all the speakers).

Trying to figure out how to get the pre amp signal for the front speakers to the amp? Not sure if there is a way to tap wires from the radio to install rcas or saw like the midline have to rip apart the stereo to install rcas, ect. Dont want to install a loc as i heard the quality is not as great and no impressed with the sound quality as is lol. Thanks for any help.
 
Discussion starter · #8 ·
Yea didn't see a email address didn't want to bug with a visitor message lol. It's the Rf system so don't know if its like the midline or not.
 
Discussion starter · #10 ·
vilim12 said:
You can get it directly from the subwoofer under the drivers seat

make pins thatll fit into the stock harness so you don't have to cut it and can revert back to stock
Click to expand...
Think that would work for subs but for door speakers dunno if that would be a good source. Would like to have source like lf rf lr rr
 
#11 ·
I just made a connector like mbquartz did and it awesome. I have front and rear preamp now. I previously ran a LOC from the back speakers and from my sub at one time, and neither of those sounded right. Once I did it like mbquartz it sounds awesome. Worth the little bit of trouble and money for the plugs



Sent from AutoGuide.com Free App
 
#13 ·
^^^ This is the way to go. I worked in an audio shop for 2 years, did this exact project on a customer's titan with navigation. Use a quality LOC or an amp with pre-amp inputs, and you'll be in style! Good luck!
 
Save
Reply Quote Like Like
#14 ·
vilim12 said:
You can get it directly from the subwoofer under the drivers seat

make pins thatll fit into the stock harness so you don't have to cut it and can revert back to stock
Click to expand...
Cant get pre out there... That is amplified Sub Woofer signal

I will PM you
 
Save
Reply Quote Like Like
#16 ·
Let me know what you all think... I am working new harness. With it you will unplug the harness from the OEM amp and plug the harness into this one.it will compleatly disconnect the OEM amp so you wouldnt be able to use it anymore but Heres what it will give you..

Front RCA out
Rear RCA out
Front Door Speaker Wires
Front Dash Tweeter Wires
Center Speaker Wires
Rear Speaker Wires
Accessory for Amp Turn On

Compleatly plug and play..
 
Save
Reply Quote Like Like
#17 ·
im interested any luck on this?
thanks
 
Save
Reply Quote Like Like
#18 ·
MATTG I built a harness for someone but we are going to do something diffrent in his truck. If you need it I can have him send it to you instead of back to me..
 
Save
Reply Quote Like Like
#19 ·
Here the first one
 

Attachments

Save
Reply Quote Like Like
#20 ·
I am interested in one as well. PM me the cost for one of these. Thank you!
 
Save
Reply Quote Like Like
1 - 20 of 20 Posts
About this Discussion
19 Replies
10 Participants
Last post:
Elite130
Nissan Titan Forum
posts
4M
members
177K
Since
2003
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
Explore Our Forums
Titan General Discussion Member Classifieds Titan Performance Modifications Titan Suspension Titan Parts & Accessories