Nissan Titan Forum banner
Cancel
Create thread New Garage Forums

Lifts available for Titans??

Jump to Latest
1 - 19 of 19 Posts
N

NSPRO4X

· Registered
Joined
·
9 Posts
Discussion starter · #1 ·
hey all.

please excuse the stupidity but i'm new to lifts..

I'm looking to go 295 70r18 and I'm wondering to do this what do I need??

I see that the Titan has a couple of different leveling kits... will probably go R.C. with whatever I decide but I don't know the difference between what is offered.. I'm not looking to change the way the truck drives. What levelling kit suits me??

please reply because I'm lost!!
 
#2 · (Edited)
EDIT: Derp.

Realized you are a Pro4 from the screen name. I would do a set of RC UCA's, billstein 5100's on middle perch, and a 1.5" billet spacer off eBay. Then get a set of 1.5" rear blocks and u bolts off eBay, and a set of PRG endlinks. You can get the endlinks from PRG, or performancelifts. You'll also need a set of aftermarket cam bolts for alignment, which you can get from DirtKing FAb. That is a good, solid lift, and will work fine with to clear the tire size you want.
 
#4 ·
#7 ·
PaPro4x said:
EDIT: Derp.

Realized you are a Pro4 from the screen name. I would do a set of RC UCA's, billstein 5100's on middle perch, and a 1.5" billet spacer off eBay. Then get a set of 1.5" rear blocks and u bolts off eBay, and a set of PRG endlinks. You can get the endlinks from PRG, or performancelifts. You'll also need a set of aftermarket cam bolts for alignment, which you can get from DirtKing FAb. That is a good, solid lift, and will work fine with to clear the tire size you want.
Click to expand...

I like this route, or go for a set of 2.5" coilovers if you like to hit the dirt a lot. RC makes a good lift (We have killer deals on them).
 
#9 ·
Then the lift I mentioned would be the route that I would go in your shoes. If you just daily drive and mild off roading it will be a great set up. If you really do a ton of hard offroading, then Coilovers are the route to take like mentioned by TAP. SAWS or ICONS would be awesome.

The RC 3" out the box is ok at best. But the spacer is junk, and you'll have a cali lean without blocks in the rear which are not included. That is why I say take the route I mentioned.
 
#11 ·
No problem man.
 
#12 ·
aaaand this is pretty close to what it will look like when your done. I have exactly what PaPro described except I removed sway bar completely. Your tire selection will be slightly larger too.

Image

Image
 
  • Like
Reactions: LVTAP
Save
Reply Quote Like Like
#14 ·
  • Like
Reactions: LVTAP
Save
Reply Quote Like Like
#18 · (Edited)
yes you do, the 3" kit will get you more than level, it will bring your front up about 1" higher than the back end. A 1.5" block will get you about a half inch rake back
 
Save
Reply Quote Like Like
1 - 19 of 19 Posts
About this Discussion
18 Replies
9 Participants
Last post:
thebassn8tr
Nissan Titan Forum
posts
4M
members
177K
Since
2003
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
Explore Our Forums
Titan General Discussion Member Classifieds Titan Performance Modifications Titan Suspension Titan Parts & Accessories