[hamelpower]

If you have a TITAN with a levelling kit from 2 inch to 3 inch could you please put some pic of you truck and also tell what brand and size of the tire on your truck ???? It would help me so much !!!!

tank you

 

[JLG7820]

Rc 3inch level
With 305 65 18s

Sent from my Autoguide iPhone app

 

[TEX=TTN]

i have a 2" level on my 05 4x4. oh and 275/60R20

and my most recent pic with no steps and added pocket flares\/\/\/\/

 

[honda250xtitan]

2" leveling kit with PRG upper control arms on my 2011 pro4x. 295 70 18 nitto terra grapplers. I need to go wider tires next time...:huh:

 

[TEX=TTN]

2" leveling kit with PRG upper control arms on my 2011 pro4x. 295 70 18 nitto terra grapplers. I need to go wider tires next time...:huh:

your truck looks so much taller then mine, looks really good

 

[honda250xtitan]

your truck looks so much taller then mine, looks really good

Thanks. Its the pro4x coil springs. nice and stiff. and the newer titans have the coilbuckets welded lower on the frame= taller front to begin with stock.

 

[kalebearls]

2004 4x4 LE off road package

2inch PRG on 285/55r20


Sent from my Autoguide iPhone app

 

[goree]

2" prg level, Bilstein 5100's middle perch, 2-1" blocks rear, camburg , 285/60/20 Goodyear duraTrac's

It actually sits 1" higher in rear, but haven't got a pic on level ground yet. 41" front 42" rear.

Sent from Goree's Autoguide iPhone app

 

[Stock '06]

I didnt see that scratch on front when yall were down here last month?

 

[kalebearls]

are those rear
blocks
expensive?


Sent from my Autoguide iPhone app

 

[kalebearls]

if I have the PRG 2" leveling kit on the front, what can I do to get about 2-3 more
inches of lift on my truck for cheap?


Sent from my Autoguide iPhone app

 

[honda250xtitan]

adjustable bilstein 5100's for about 2" more at the most. 1.5 is recommended (middle setting) You'd prolly gain more height by putting 08+ 4x4 coil springs combined with bilsteins and replace your entire stock strut. keep the leveling kit of course.

so...leveling kit + 08 4x4 coil springs+ bilstein 5100's on middle setting. bilsteins are around 200, springs are around 150

 

[kalebearls]

what about back? assuming that's just for
the front. sorry I'm
kinda a
newbie to suspension parts


Sent from my Autoguide iPhone app

 

[kalebearls]

couldn't I do Bilstein5100 middle setting with leveling kit on front then 3 inch block in back?


Sent from my Autoguide iPhone app

 

[CVTitan05]

couldn't I do Bilstein5100 middle setting with leveling kit on front then 3 inch block in back?


Sent from my Autoguide iPhone app

That will only get you overall 3.5" in the front and 3" in the rear. So the rear would sit quite a bit higher unless you got the 08+ 4x4 springs.

 

[kalebearls]

well couldn't I get a smaller block in rear to make it more level? I'm just wanting a little bit more lift for a cheap price


Sent from my Autoguide iPhone app

 

[goree]

I didnt see that scratch on front when yall were down here last month?

Scratch on the front??? I got scratches all over, it was just raining and you couldn't see them.

 

[hamelpower]

tank to everybody for the pic please continu to send pic

 

[honda250xtitan]

NO! dont do a 3" block in the rear. That'll look stupid. Pro comp 6" lifts come with a 3" block for the rear. just an idea.

you could do a 1.5 block in the rear or just a 1" block.

 

[kalebearls]

so with the bilstein 5100's, the leveling spacer, and the 1.5 block, my truck would be a little higher, but still level?


Sent from my Autoguide iPhone app