New lights are installed

vilim12 · May 5, 2012

Extreme reduction in glare. Left is reflector housing and right is projector.

Close up of the lens

Truck shot

I know some of you are wondering wheres all the LEDs and Halos? Well the answer is Im not really into all that bling in the headlights. LEDs will never be wired up but the Halos will be wired on a seperate switch so I have full control of when they are on or off..

So far loving these lights, I messed up an HID bulb while installed so im about to go order a replacement set of bulbs.

Got 68 SMD LED turn signal and running light bulbs coming sometime next week to get rid of the yellow.

08pro4x2486 · May 5, 2012

Looks good man. Take a pic of the beam pattern if you would. I'd like to pick some up eventually because my headlights look like crap after all the sun and abuse. Just so many things before I get to those though.

vilim12 · May 5, 2012

08pro4x2486 said:
Looks good man. Take a pic of the beam pattern if you would. I'd like to pick some up eventually because my headlights look like crap after all the sun and abuse. Just so many things before I get to those though.

Same with mine, OEM fell apart lol.

I had a nice list of things to do before also, but I just couldnt bare it anymore lol. Ill get beam pattern tonight, I just now figured out how to lock the bulb in correctly. and everytime you rotate the bulb in the connector the output changes so i have to play with that during the night time and against a wall to get a good idea of it. Heres a pic last night before any adjustments and before I figured it all out.

honda250xtitan · May 5, 2012

Wow. that looks great. Mine glare like crazy too. and i wanna get dark headlights. i guess a set of lights like you have would solve both problems.

vilim12 · May 5, 2012

I think the beam cutoff in the pic posted above is good enough for me, I just didnt have it locked in so the bulb found its way loose lol. Ill try and replicate that tonight

25370 · May 5, 2012

Pretty good beam pattern. As far as the halos and LEDs, I would have done the same thing as you.
That's my favorite style of aftermarket headlights as well.

vilim12 · May 5, 2012

n2titan said:
Pretty good beam pattern. As far as the halos and LEDs, I would have done the same thing as you.
That's my favorite style of aftermarket headlights as well.

Ill try and perfect it all tonight and button up the fender liner. Yours look nice too, any info on the Projector fogs?

25370 · May 5, 2012

Thanks!

My projector fogs are holding up well. It's been through rain storms and washes with no issues.
Here's the original thread.
http://www.titantalk.com/forums/titan-pictures-media-post/141080-new-fog-lights.html

ArmyAviation · May 5, 2012

I was looking at these lights for a HID set up. Where did you get these from?

sumair · May 6, 2012

not bad at all villim! i actually like they way they look. now send ur OEMs for retro fit.

gweasel77 · May 6, 2012

Looks clean & bright! :coolsmile

I'm planning on ordering me a new set of HID's from JB since one of my DDM's bit the bullet. Then eventually HID fogs also. :eyebrow:

spoonman · May 6, 2012

looking good. Rep for trying to reduce glare!!

vilim12 · May 6, 2012

sumair said:
not bad at all villim! i actually like they way they look. now send ur OEMs for retro fit.

If we had better quality lenses maybe I would spend money on them lol

carlo_natit · May 10, 2012

Looks really great. Nice setup.

gweasel77 · May 10, 2012

I was just checking out those Blazers on that website. I might try out a set of those when get around to doing HID's again. I wonder how they would look mounted in the fog opening w/o a housing? They have mounting brackets already & they say their water resistant.

25370 · May 10, 2012

gweasel77 said:
I wonder how they would look mounted in the fog opening w/o a housing?

It won't look good without a housing because the Blazers will look too small in there. My plan was to get the factory fog hole covers, drill a hole in the center just large enough to fit the Blazers and then add a shroud around the projector lens. That should not only secure the projector better, but also make it look more factory looking.

Villim, anymore daytime shots? These lights would look even more original if you add some eyelids. :eyebrow:

vilim12 · May 10, 2012

n2titan said:
It won't look good without a housing because the Blazers will look too small in there. My plan was to get the factory fog hole covers, drill a hole in the center just large enough to fit the Blazers and then add a shroud around the projector lens. That should not only secure the projector better, but also make it look more factory looking.

Villim, anymore daytime shots? These lights would look even more original if you add some eyelids. :eyebrow:

I want eye lids but then I realized they would have to be custom. I don't want vinyl due to the color matching issue. I doubt the eye lids for the factory lights would mold perfectly around these

25370 · May 10, 2012

Yeah definitely not vinyl.

sumair · May 10, 2012

get th eones off ebay. they fit decent. not perfect but they still look good.

vilim12 · May 10, 2012

They for oem lense, I don't think these are the exact same mold

New lights are installed

vilim12

08pro4x2486

vilim12

honda250xtitan

vilim12

25370

vilim12

25370

ArmyAviation

sumair

gweasel77

spoonman

vilim12

carlo_natit

gweasel77

25370

vilim12

25370

sumair

vilim12

Top Contributors this Month

Recommended Communities