Nissan Titan Forum banner
Cancel
Create thread New Garage Forums

Leveling Kit ?

Jump to Latest
1 - 16 of 16 Posts
#2 ·
jenabnit said:
I have a 2008.5 se crew cab 4wd. I want to install a leveling kit, but not sure which one is best. I would not like to do pinch mod weld. What is everyone's thoughts on the ones listed below? Tx in advance!

http://pages.ebay.com/motors/link/?nav=item.view&id=221086440079
Click to expand...
Get any solid 1.5 inch billet spacer. The pwm will only need to be done if you want a big aggressive tire.

If you want to go more than level I would suggest the rough country 3 inch kit because it comes with new upper control arms and sway bar links.

But 1.5 inch is the biggest you can stick on there with out changing the upper control arms.


Sent from AutoGuide.com App
 
Save
Reply Quote Like Like
#3 ·
you will probably get coil bucket contact with a 2 inch kit. Rule of thumb was 08+ years 1.5 would work because they have slightly longer/stiffer strut setups than 04-07 years
 
#5 ·
jenabnit said:
Good to hear! I will do the 1.5" solid billet aluminum spacers then. I'm going to run 285 65 18 nitto trail grappler mt on stock rims, so hopefully the spacers will be all I need. If not, someone please let me know. Tx to everyone for your input!

Sent from AutoGuide.com Free App
Click to expand...
You can run those tires with out the spacer on stock wheels. You could go 305 60 18, 275 70 18 with no leveling kit and no rubbing


Sent from AutoGuide.com App
 
Save
Reply Quote Like Like
#6 ·
All good info from the guys!
 
Save
Reply Quote Like Like
#8 ·
Save
Reply Quote Like Like
#10 ·
Thats the same one I have on my truck.
 
Save
Reply Quote Like Like
#12 ·
RC has a uca, sway bar link, 3" block combo got 289 but they accept most reasonable offers, thats the best your gonna find that stuff!... Speaking of which dose anyone know if I use 3" spacers will I need new brake line, steering linkage, etc... or use all stock?

Welcome to the dark side, we have cookies here.
 
Save
Reply Quote Like Like
#13 ·
Use the stock ones you will be fine with the 3" kit/spacer.
 
Save
Reply Quote Like Like
#14 ·
That kit will work great on your T! No need to buy uca's for that size because it is the proper size. You won't need endlinks either. Should be able to get it aligned with out cam bolts too.
 
1 - 16 of 16 Posts
About this Discussion
15 Replies
7 Participants
Last post:
LVTAP
Nissan Titan Forum
posts
4M
members
177K
Since
2003
Nissan Titan Talk Forum is a community for truck owners to discuss the Titan Cummins, Warrior, Midnight Edition and more!
Full Forum Listing
Explore Our Forums
Titan General Discussion Member Classifieds Titan Performance Modifications Titan Suspension Titan Parts & Accessories