CAMS+Uprev+Stillen++ Starting Tomorrow

gweasel77 · Nov 4, 2011

so you're saying I still need to build out a server farm in my cab

LOL Naw, just a laptop.

deerslayer · Nov 4, 2011

Still no videos of your truck in action!!?? WTH!!!!!! Might as well un subscribe from this boring azz thread! LOL

titanss · Nov 4, 2011

gweasel77 said:
GTechs are ok if your trying to beat your own previous times, but nothing is as accurate as Cipher!

If the RR or SS is set up right it is dead on with my track times until around 13.76. I need to tweek my SS some more.

brodo420 · Nov 4, 2011

pcg_k25 said:
$200 for a used gtech RR is high bro! Look around you will find one cheaper.

I did, ebay, etc. didn't see one that was cheaper than $200 without shipping. Already bought it anyway - I wanted to stay below $180, but I'm happy with it so far.. even though I have yet to use it heh

pcg_k25 said:
I though you would put down higher numbers with the head work. What was the price on the head work, if you dont mind me asking.

could be the dynojet, Rob says he's been told his dyno is a heartbreaker .. track/gtech times will tell.

Also, if you look at Paparyno's truck, he's showing almost 20rwhp less, that means my head work gave me that much more. The machine work alone was $1600. However, I do not think my numbers are going to be as good as his (yet!)

deerslayer said:
Still no videos of your truck in action!!?? WTH!!!!!! Might as well un subscribe from this boring azz thread! LOL

the only video I have is the stock dyno run :\ I am all over Rob for that, the next dyno will be video'd .. there are lots of pictures coming. I'm trying to get some video - what do you want to see?

We also have to re-tune for the low-end. And I need to get the burnoutmod going to get higher RPMs for launch.. AND I need to get that shiftkit ASAP!

OFELIPE · Nov 4, 2011

burnout mod takes less than an hour. one of the cheapest mods out there

DRTYAZN · Nov 4, 2011

Brodo, you have PM regarding a Shift Kit... and the burnout mod can be done within 15-30 minutes, one new wire to run, 2 wires to locate and splice, one toggle switch to mount...

honda250xtitan · Nov 4, 2011

vids of the truck on the street would be ideal...dyno vids are kinda lame cause it aint moving! lol

08crewcab · Nov 4, 2011

incab speedo video 0-80 or something would be sweet

brodo420 · Nov 4, 2011

DRTYAZN said:
Brodo, you have PM regarding a Shift Kit... and the burnout mod can be done within 15-30 minutes, one new wire to run, 2 wires to locate and splice, one toggle switch to mount...

yeah buddy! I responded.. 20 times or so. one foot out the door.. let's get it!

Toomnymods · Nov 5, 2011

brodo420 said:
I did, ebay, etc. didn't see one that was cheaper than $200 without shipping. Already bought it anyway - I wanted to stay below $180, but I'm happy with it so far.. even though I have yet to use it heh

could be the dynojet, Rob says he's been told his dyno is a heartbreaker .. track/gtech times will tell.

Also, if you look at Paparyno's truck, he's showing almost 20rwhp less, that means my head work gave me that much more. The machine work alone was $1600. However, I do not think my numbers are going to be as good as his (yet!)

the only video I have is the stock dyno run :\ I am all over Rob for that, the next dyno will be video'd .. there are lots of pictures coming. I'm trying to get some video - what do you want to see?

We also have to re-tune for the low-end. And I need to get the burnoutmod going to get higher RPMs for launch.. AND I need to get that shiftkit ASAP!

Actually you are only dynoing about 10-12rwhp more than a non vvt cammed titan, I've dynoed for 336hp and 370tq on a dynojet with sae adjustments, std numbers add about another 15hp but it will not correlate to other dyno jets across america.. sae numbers help level the playing field taking away bonues from elevation, temp etc..

I really don't think you are going to see the headwork gains untill you add meth injection, then you will be able to advance the timing enough to see some awesome gains from the extra compression you added. 91 or 92 octane just doesnt give much room for tuning

reds_titan · Nov 5, 2011

DRTYAZN said:
Brodo, you have PM regarding a Shift Kit... and the burnout mod can be done within 15-30 minutes, one new wire to run, 2 wires to locate and splice, one toggle switch to mount...

i shoulda had you do it when we met up...lol. i've been wanting it done, maybe when we meet up for the Mud Drags.

DRTYAZN · Nov 5, 2011

No Prob Red... Definitely next time we meet up... Good times...

deerslayer · Nov 5, 2011

come on Brodo! 0-80 speedo vid or something

My God I did a speedo vid when I did a drop in filter 3 years ago, much less a page full of mods. LMAO

brodo420 · Nov 5, 2011

deerslayer said:
come on Brodo! 0-80 speedo vid or something My God I did a speedo vid when I did a drop in filter 3 years ago, much less a page full of mods. LMAO

hard to find places around here! I did get a vid, its not 0+ though, it's about 20-75ish.. waiting for video to upload and I'll post.

brodo420 · Nov 5, 2011

not the best, will get more, but here's a taste:

20-75

guess I should get a youtube account or something to play/auto embed? (I searched but no go around here.. apparently this site will auto embed a youtube, correct?)

DRTYAZN · Nov 5, 2011

OK Brodo, We are on for tomorrow... I'll call you later today to confirm the time and location... oh yeah, bring your video camera tomorrow and I'll help you take some action vids...

brodo420 · Nov 5, 2011

DRTYAZN said:
OK Brodo, We are on for tomorrow... I'll call you later today to confirm the time and location... oh yeah, bring your video camera tomorrow and I'll help you take some action vids...

cool! I'll bring my flip too. Everyone else is too scared to ride with me :lol:

VinylImagez · Nov 5, 2011

brodo420 said:
not the best, will get more, but here's a taste:

20-75

guess I should get a youtube account or something to play/auto embed? (I searched but no go around here.. apparently this site will auto embed a youtube, correct?)

you need the tranny LP mod

brodo420 · Nov 6, 2011

VinylImagez said:
you need the tranny LP mod

yes of course. part of me wanted to do it all at once, another frame of mind wants to increment SOME

thanks to DRTYAZN, I could be setup before end of next week! :redblob"

figured out a way to use the bullydog suction and taped my flip to the window - hard to see the exact speed due to the angle, but at least I have a few vids.. fun stuff!

0-80
0-85ish
slow roll to 80

reds_titan · Nov 6, 2011

brodo420 said:
yes of course. part of me wanted to do it all at once, another frame of mind wants to increment SOME thanks to DRTYAZN, I could be setup before end of next week! :redblob"

figured out a way to use the bullydog suction and taped my flip to the window - hard to see the exact speed due to the angle, but at least I have a few vids.. fun stuff!

0-80
0-85ish
slow roll to 80

can't see them...

CAMS+Uprev+Stillen++ Starting Tomorrow

gweasel77

deerslayer

titanss

brodo420

OFELIPE

DRTYAZN

honda250xtitan

08crewcab

brodo420

Toomnymods

reds_titan

DRTYAZN

deerslayer

brodo420

brodo420

DRTYAZN

brodo420

VinylImagez

brodo420

reds_titan

Top Contributors this Month

Recommended Communities